XENIC
FROM DIN 3
Optimum safety even for lightweights with ambitions. With a DIN setting range of 3–7, the Xenic 7 offers optimal safety even for very light touring skiers. Reliable release even at low settings is not a matter of course for pin bindings, but it is extremely important for light and very light people.
The binding for ski touring with the family.
XENIC 7 – DIN 3-7
XENIC 10 – DIN 4-10
XENIC
The Xenic is the solid light-weight binding for high-mountain skiers who fully attack on the way up, but also accelerate downhill in any Alpine terrain. For both high-performance skiers as well as those who work on their fitness on the slope. With a DIN setting of as low as 3 it also offers the necessary safety and outstanding downhill features even to very light and young skiing enthusiasts.
| Segment: | High Touring |
| Target group: | ambitious high-mountain skiers who pay attention to light weight and do not gamble with safety and performance. |
| Ideal ski width: | between 70 and 105 mm |
| DIN setting: | 3 to 10 |
| Weight: | 280 g / unit without ski stopper |
UNDERESTIMATED
LIGHTWEIGHT
UNDER-
ESTIMATED
LIGHTWEIGHT
The surprisingly high power transmission is the result of a new design. The transfer of the downhill technology of the Tecton and the extra wide support of the heel make a significant difference. They provide the necessary power to control the skis with precision and ease, even in difficult conditions.
Direct power transmission
Extra wide support
Powerful turns made easy due to the high stability of the solid, extra wide support of the heel unit.
Consistent optimum edge grip
Dynamic length compensation
Consistent full edge grip and unlimited agility due to the dynamic, incomparable 10 mm length compensation for the natural flex of the ski.
Lightness and performance
Optimal material mix
Maximum stability and resilience at the lowest weight due to the optimally coordinated use of high tech materials.
ALWAYS ON
THE SAFE SIDE
Under the lightweights, the Xenic is the only binding equipped with such a wide range of efficient safety technologies. The patented system of the front unit, for example, which holds the boot firmly and securely in the binding, even during dynamic downhill runs.
No locking is necessary to prevent pre-release. Two separate systems for lateral and frontal release in the heel unit with a DIN setting between 3 and 10 provide confidence and safety, even to very low-weight ski tourers.
No pre-releases
No locking necessary
Secure hold and prevention of pre-release in downhill skiing without locking the system, ensured by exceptional, horizontally moving pin levers.
DIN setting for lateral and vertical release
Two separate release systems
Reliable release by the use of two separate systems in the heel unit with separate DIN settings for lateral and vertical release.
Reliable release in any situation
Dynamic length compensation
Consistent release at the set DIN values due to the dynamics of the incomparable 10 mm length compensation for the flexing ski.
Carbon fiber-reinforced high-tech plastics are used for the front housing. In other words: the Xenic is now even more stable and longer lasting.
Climbing up to the peak with ease and getting downhill safely. Our claim is to achieve this at top performance and with the lowest possible weight. The optimal mix of materials makes the difference. Whether light glass fiber- or carbon fiber reinforced high tech plastics are used, as in the automotive and aviation industries, or high-quality metal alloys is ultimately determined by the technical requirements for optimal product safety and durability and a powerful performance without compromise.
Ninety-nine percent of the components are made in Switzerland and assembled into high-quality products in Reichenbach.
| DIN Xenic 7 | 3 – 7 |
| Ski width | > 70 mm |
| Weight | 280 g per unit without stopper |
Subject to technical changes
| DIN Xenic 10 | 4 – 10 |
| Ski width | > 70 mm |
| Weight | 280 g per unit without stopper |
Subject to technical changes
| Xenic crampons
Robust, light crampons. Easy to use 85 / 95 / 105
|
Frame ski brake
Light, but effective stopper. An important plus for safety. |
Ski leash safety pin-system
Anti-loss-ski. To be used in combination with a ski-brake. |
 |
 |
 |
The data apply to ski width in mm. Subject to technical changes.
- Horizontally moving pin levers for a secure hold in downhill skiing without blocking
- Exceptionally broad support of the heel unit for progressive power transmission
- Reliable release with 10 mm elasticity for the flexing ski
- Separately and infinitely adjustable lateral and vertical release
- Sophisticated technology for easy operation without compromise
- Fixed stop and broad step-in pedal for easy step-in
REALISTIC 3D
PRODUCT
VISUALIZATION
